DIY Concrete Playground

Pin
Send
Share
Send


Such a concrete platform in front of a house or a garage is very simple to do with your own hands. The site is poured in place alternately in the form of tiles with a decorative pattern. Unlike purchased forms, our home-made, which makes it possible to make tiles of any size and thickness.

Tile Mold


The shape is homemade, quadrant, with dimensions of 90 cm x 90 cm x 8 cm. Made from a thin wooden plank. The decorative pattern is made with slats, not the entire thickness of the form. Everything is fastened with ordinary screws.

Ideally, of course, it would be better to weld such a shape out of metal. But if you have no desire and you need to quickly lay out a small area, then the tree is more practical, since it is easier to work with.
For easier extraction of the mold from concrete, all its faces were smeared with petroleum jelly.
In my case, it takes about 36 kg of solution to produce one plate to fill out the form.

Laying a concrete platform in front of the garage


We level the platform that we will fill. I managed with a simple leveling, without any substrates, laid the tile directly on the ground.
We are preparing a cement solution. For painting, I used a special dye for cement, so that the tile had a more familiar color.
After the solution is well mixed and has the desired consistency, we proceed directly to the styling.
Set the form, fill with the solution. From above, we smooth everything to a flat surface.

Before removing the form, you must wait about two hours until the solution sets. Then gently lift the form, alternately from different sides.

If, after removing the form, torn or broken edges are formed, they can be manually corrected until the concrete has finally solidified. In general, you should not worry about them, since in the end all the cracks will be spilled with concrete and it will fill all the voids and cracks.

At the final stage, I spread cement without dye, spilled and rubbed all the cracks with it. The tile is rubbed with a damp sponge to remove excess grouting concrete.
I am pleased with the result that I wanted - I got it.
In the future, I plan to make garden paths in the same way. Good luck to all!

Original article in English

Pin
Send
Share
Send

Watch the video: How To Build A Playground & Install A Soft Rubber Floor (April 2024).