Blue wisteria

Pin
Send
Share
Send

Doing something with your own hands is a wonderful gift for relatives. Beaded trees at home, once withered, do not require special care, they look great in the interior.
To create such a miracle, we will use Czech beads.
We will need:
White beads - 30 gr;
Blue beads - 25 gr;
The beads are dark blue - 25 gr;
Green beads (bugles) - 30 gr;
Gray wire 0.03 - 1 coil;
Thick wire (25-30 in length) - 2 pcs;
Matches - 2 pcs;
Gypsum - 800 gr;
Paint (brown) - 100 ml;
Thin wire (for fixing);
Medium thickness wire;
Toothpicks
Super glue;
Stones (large and small);
Shiny powder (blue);
Pot (I take the pallet from the flower).
Well, let's begin our interesting work. To get started, pick out the shades.

Cut a thin wire with a length of about 70 centimeters. We string 5 dark blue beads, lead them to the middle of the wire and twist the “loop method”.

We work with one side. We collect the beads in this order: 27 beads of dark blue color, 4 blue, 4 blue, 10 blue, 1 blue, 19 blue, 5 white, 5 blue and 16 white.

Then twist the loops in the following sequence: 6 blue, 8 blue, 9 blue, 3 blue, 4 blue, 3 blue, 1 blue, 10 blue, 1 blue, 14 blue, 5 blue, 5 white, 5 blue, 16 white.

And so it is on the other hand.

That's what we got.

Next, fold the wire in half and twist.

Weaving leaves from glass beads in the French way by weaving. A total of 27 leaves, 9 per tree.

That's what we got. Twigs of about 12-13 pieces per tree. Twist 3 branches into one.

We make a blank of wire. Birch 1 thick wire, bend it a little above. We wrap it on the middle and leave a piece on top (these will be branches) and form the legs of the tree below. Now we take the wire even thinner and make 3 branches as well. The average wire should be slightly higher than the other two. And there are three such blanks: 1 high, 1 medium, 1 low.

Next, take nine leaves and twist them three in one branch. We attach them to the top of the wire. Then we wind 6-7 branches of blue wisteria on the two remaining wires.

And so three trees. Then we dilute the gypsum with water, to a state of thick sour cream and add a little super glue. Pour plaster into the pot. We insert three wisteria from above and slightly cover the bottom of the trunks with gypsum. I also inserted 3 green bushes (for the aquarium). Allow the day to dry.

Then paint the trunks with gypsum. Since there is a thin layer of gypsum, it will dry in half a day.

From small pebbles we spread the path. On the back of the glue we build a fence with large stones.

Sprinkle the track with blue sparkles.

We make a little bench. We take 2 matches, cut off the heads. On top of them with glue 3 trimmed toothpicks. We make legs from the halves of one match. Glue perpendicularly. We connect with glue.

Top on the legs with glue from toothpicks bench seat.

We put the finished bench near the tree. Sprinkle the bottom with green beads. See how beautiful you got.

Pin
Send
Share
Send

Watch the video: Wisteria or Wysteria - How to grow and control Wisteria (March 2024).