It is not always possible to find barbecue tables of the right size and shape in the nearest store. In addition, their price is quite high, and the service life is often less than we would like. So let's craft it yourself.
The basis for the gratings will be made of a metal corner, sawing it into pieces of the desired size. It will take 4 pieces for a large grill and 4 for a narrow one. We cut off their corners, weld two rectangles.
We cut a metal rod into segments and weld them to the base of a large rectangle. In order for the distances between the rods to be the same, we use some metal part or a wooden die as a guide.
The process of assembling a homemade barbecue table
From the same corner from which we made the basis for the grills, we cut the legs for a narrow grill and weld them. Then complement the rods. Now you can install a narrow lattice on a wide one, and then connect them by welding.
For the manufacture of pens we use a thicker rod. To bend it, pinch it in a vise and use a gas burner to heat the bend points. Cut off the desired size with a grinder and weld.
Next, you need to process the product with a refractory composition. We place the grate in a pre-prepared table with a built-in lid from a metal barrel of 200 liters.
The work is completed, the barbecue table is ready, and considerable money has been saved! In addition, the design turned out to be very original.
Details on how to make a homemade do-it-yourself barbecue table for giving and at home can be found in the video on the website.
