In this review, the author shows the process of making a useful fixture for a home workshop or garage.
As you already understood, this is the "third hand". An irreplaceable thing when processing workpieces made of metal or wood. And to make this adapt is very simple.
Of the basic materials required:
- piece of metal strip;
- piece of round bar;
- profile pipe;
- bolt and elongated nut;
- piece of square bar.
We recommend reading: "third hand" for welding from steering levers.
The first step is to weld the elongated nut to the end of the profile pipe.
Homemade manufacturing process
The next step is to cut off a piece of strip and a piece of round bar. We weld them together.
A hole must be drilled at the end of the bolt, in which the author then cuts a thread in it.
Cut a piece of square bar and weld it to the bolt. Screw the bolt into the elongated nut.
Next, you need to cut off the cap from another bolt and drill a hole in it. Using a screw, we fix it to the end of the bolt.
We drill a hole in the profile pipe and put it on a round bar welded to the strip. Homemade ready.
For details on how to make the "third hand" fixture for the home workshop, see the video on our website.
