How to make a fencing element of balconies from a profile pipe

Pin
Send
Share
Send

In this review, the author shows how to make an original fencing element for balconies from a profile pipe 50 * 50 mm.

Also, these decorative elements can be used for other purposes - for example, for the manufacture of fences or when installing improvised fences on the territory of a private house.

Please note that the size of the profile pipe can be larger or smaller - whatever you need, use this one.

First of all, the master draws two parallel lines on all four sides of the profile pipe. Then they need to be connected with diagonal lines - one on each side.

The main stages of work

At the next stage, using a grinder, it will be necessary to make cuts in each of the four ribs of the profile pipe.

Next, the author takes a chisel, puts it on a diagonal line and strikes with a hammer, slightly pushing through the metal.

Then one edge of the workpiece must be clamped in a vice. The other end of the wizard begins to twist counterclockwise.

The edges at the incision site must be trimmed with a hammer, and then boil. Well, the last step is grinding.

For more information on how to make a fencing element of a balcony with your own hands (from a profile pipe 50 * 50 mm or another size), see the video on our website.

Pin
Send
Share
Send

Watch the video: Revit Architecture. Use New Railing in Revit Tutorial (March 2024).