Soft bed for giving

Pin
Send
Share
Send


To create a soft country trestle bed you will need:
• plastic bottles with a volume of 1.5 liters - 72 pieces;
• adhesive tape;
• double sided tape;
• scissors;
• glue "cosmofen";
• cardboard;
• reel of any strong rope;
• foam rubber 5cm thick;
• faux fur;
• threads and a needle;
• knife.
The first link of three plastic bottles is created. One of them remains intact, and the upper part is cut off from the other two and discarded. The resulting base is worn on the first bottle on both sides. There are 24 pieces of such links for this model. Now a section is formed of three links and wrapped tightly with adhesive tape. A total of 8 sections will be required.

The bottle sections are joined together and secured with tape on all sides. A rectangle is cut out of cardboard, equal in size to the narrow plane of the plastic blank. The same size will need a piece of foam. The cardboard is glued to the upper base of the product with universal glue, on top it is additionally fixed with tape.

Then, double-sided tape is applied to the sides of the workpiece, the upper paper part is removed and the rope is pulled along the sticky layer. The rope cloth is laid in dense rows around the entire side of the model. The winding starts at the bottom of the product and ends, not reaching the very top of 5cm. From a fur cloth strips 6 cm wide are cut. and with the help of glue "cosmofen" are glued to the remaining walls without winding. Strips of fur are also glued along the side faces of the rope web, this will fix the winding.

Now a flap of fur fabric is cut out larger than the cardboard base, adding 7 cm to each side for bending inward. The corners of the fabric are sewn up with a needle and thread, and the fur fabric is put on foam. The resulting seat is glued to the workpiece by dropping a few drops on cardboard.

Pin
Send
Share
Send

Watch the video: ASMR Giving You a Soft Sleep Treatment Scalp and brain massage, hair brushing, lotion, countdown. (March 2024).